 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET GaAs INTEGRATED CIRCUIT PG2159T6R L, S-BAND SPDT SWITCH DESCRIPTION The PG2159T6R is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band applications. This device can operate 2 control switching by control voltage 1.8 to 3.3 V. This device can operate frequency from 0.05 GHz to 3.0 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) (T6R) package. And this package is able to high-density surface mounting. FEATURES * Switch control voltage * : Vcont (H) = 1.8 to 3.3 V (2.7 V TYP.) : Vcont (L) = -0.2 to 0.2 V (0 V TYP.) Low insertion loss : Lins1 = 0.20 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : Lins2 = 0.21 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : Lins3 = 0.23 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : Lins4 = 0.25 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : Lins5 = 0.27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V High isolation : ISL1 = 27 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL2 = 27 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL3 = 27 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL4 = 27 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : ISL5 = 27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Handling power : Pin (1 dB) = +25.5 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V : Pin (0.1 dB) = +22.0 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V High-density surface mounting : 6-pin plastic TSSON (T6R) package (1.0 x 1.0 x 0.37 mm) * * * APPLICATIONS * L, S-band digital cellular or cordless telephone TM * W-LAN and Bluetooth ORDERING INFORMATION Part Number Order Number Package 6-pin plastic TSSON (T6R) (Pb-Free) Marking G7 Supplying Form * Embossed tape 8 mm wide * Pin 1, 6 face the perforation side of the tape * Qty 5 kpcs/reel PG2159T6R-E2 PG2159T6R-E2-A Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PG2159T6R Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PG10710EJ01V0DS (1st edition) Date Published June 2008 NS Printed in Japan 2008 PG2159T6R PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 1 6 1 (Top View) 6 6 (Bottom View) 1 Pin No. 1 2 3 Pin Name OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1 G7 Vcont1 Low High Parameter 2 5 2 5 5 2 4 5 6 3 4 3 4 4 3 Remark Exposed pad : GND TRUTH TABLE Vcont2 High Low INPUT-OUTPUT1 OFF ON INPUT-OUTPUT2 ON OFF ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Symbol Vcont Pin Pin TA Tstg Ratings 6.0 +26.0 Note1 Note2, 4 Note3, 4 Unit V dBm dBm C C Switch Control Voltage Input Power Input Power Operating Ambient Temperature Storage Temperature +8 + Vcont 20/3 -45 to +85 -55 to +150 Notes 1. 2. 3. 4. Vcont1 - Vcont2 6.0 V 2.7 V Vcont1 - Vcont2 3.3 V 1.8 V Vcont1 - Vcont2 2.7 V Please refer to following chart. INPUT POWER vs. SWITCH CONTROL VOLTAGE 30 29 28 27 26 25 24 23 22 21 20 19 18 1.5 Input Power Pin (dBm) 2.0 2.5 3.0 3.5 4.0 Switch Control Voltage Vcont (V) Remark The graph indicates nominal characteristics. 2 Data Sheet PG10710EJ01V0DS PG2159T6R RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) Parameter Switch Control Voltage (H) Switch Control Voltage (L) Symbol Vcont (H) Vcont (L) MIN. 1.8 -0.2 TYP. 2.7 0 MAX. 3.3 +0.2 Unit V V ELECTRICAL CHARACTERISTICS 1 (TA = +25C, Vcont (H) = 2.7 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Insertion Loss 5 Isolation 1 Isolation 2 Isolation 3 Isolation 4 Isolation 5 Input Return Loss 1 Input Return Loss 2 Output Return Loss 1 Output Return Loss 2 0.1 dB Loss Compression Note2 Input Power 1 dB Loss Compression Note3 Input Power 2nd Harmonics 3rd Harmonics Input 3rd Order Intercept Point Symbol Lins1 Lins2 Lins3 Lins4 Lins5 ISL1 ISL2 ISL3 ISL4 ISL5 RLin1 RLin2 RLout1 RLout2 Pin (0.1 dB) Test Conditions f = 0.05 to 0.5 GHz f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 3.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 3.0 GHz f = 2.0 GHz/2.5 GHz f = 0.5 to 3.0 GHz Pin (1 dB) f = 0.5 to 3.0 GHz Note1 Note1 Note1 Note1 MIN. - - - - - 24 24 24 24 24 15 15 15 15 +20.0 - - TYP. 0.20 0.21 0.23 0.25 0.27 27 27 27 27 27 20 20 20 20 +22.0 +22.0 +25.5 MAX. 0.35 0.35 0.40 0.42 0.45 - - - - - - - - - - - - - - - Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm 2f0 3f0 IIP3 f = 2.0 GHz/2.5 GHz, Pin = +10 dBm f = 2.0 GHz/2.5 GHz, Pin = +10 dBm f = 0.5 to 3.0 GHz, 2 tone 5 MHz spacing 65 60 - - 77 80 +49.0 dBc dBc dBm Switch Control Current Switch Control Speed Icont tSW 50% CTL to 90/10% 0.2 20 1.0 200 A ns - Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. Data Sheet PG10710EJ01V0DS 3 PG2159T6R ELECTRICAL CHARACTERISTICS 2 (TA = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Insertion Loss 6 Insertion Loss 7 Insertion Loss 8 Insertion Loss 9 Insertion Loss 10 Isolation 6 Isolation 7 Isolation 8 Isolation 9 Isolation 10 Input Return Loss 3 Input Return Loss 4 Output Return Loss 3 Output Return Loss 4 0.1 dB Loss Compression Note2 Input Power 1 dB Loss Compression Note3 Input Power Switch Control Current Switch Control Speed Symbol Lins6 Lins7 Lins8 Lins9 Lins10 ISL6 ISL7 ISL8 ISL9 ISL10 RLin3 RLin4 RLout3 RLout4 Pin (0.1 dB) Test Conditions f = 0.05 to 0.5 GHz f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 3.0 GHz f = 0.05 to 0.5 GHz f = 0.5 to 3.0 GHz f = 2.0 GHz/2.5 GHz f = 0.5 to 3.0 GHz Pin (1 dB) f = 0.5 to 3.0 GHz Note1 Note1 Note1 Note1 MIN. - - - - - 23 23 23 23 23 15 15 15 15 +12 - - - - TYP. 0.21 0.22 0.24 0.26 0.28 26 26 26 26 26 20 20 20 20 +15.5 +15.5 +19.5 MAX. 0.36 0.37 0.41 0.43 0.46 - - - - - - - - - - - - Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm Icont tSW RF None 50% CTL to 90/10% RF 0.2 20 1.0 200 A ns Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. 4 Data Sheet PG10710EJ01V0DS PG2159T6R EVALUATION CIRCUIT Vcont1 INPUT Vcont2 1 000 pF C0 1 000 pF 6 5 4 1 2 3 C0 C0 OUTPUT1 OUTPUT2 Remark C0 : 0.05 to 0.5 GHz 1 000 pF : 0.5 to 3.0 GHz 56 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PG10710EJ01V0DS 5 PG2159T6R MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS 6-PIN PLASTIC TSSON (T6R) (UNIT: mm) MOUNTING PAD 0.15 0.15 0.15 0.65 0.15 1.2 0.45 0.35 1.2 0.35 SOLDER MASK 0.13 0.15 0.13 0.125 0.13 1.15 0.75 0.45 0.35 0.75 1.15 0.35 Solder thickness : 0.08 mm Remark The mounting pad and solder mask layouts in this document are for reference only. 6 Data Sheet PG10710EJ01V0DS 0.225 0.6 0.225 PG2159T6R PACKAGE DIMENSIONS 6-PIN PLASTIC TSSON (T6R) (UNIT: mm) (Top View) 1.00.1 1.00.1 (Bottom View) 1.00.1 0.08 MIN. 0.15+0.07 -0.05 A 0.08 MIN. A 0.15+0.07 -0.05 0.350.06 0.350.06 0.45 0.1 1.00.1 A A 0.130.07 0.230.07 0.1750.075 0.37+0.03 -0.05 Remark A > 0 Data Sheet PG10710EJ01V0DS 7 PG2159T6R RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (terminal temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 WS260 Condition Symbol IR260 For soldering Preheating temperature (package surface temperature) : 120C or below Caution Do not use different soldering methods together (except for partial heating). 8 Data Sheet PG10710EJ01V0DS PG2159T6R Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. * The information in this document is current as of June, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PG10710EJ01V0DS 9 PG2159T6R Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. |
Price & Availability of UPG2159T6R-E2-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |